One Precision can provide up to 20 parts in 15 days or less, depending on part specification and volume.
Silicone molds are less expensive than the tooling used for injection molding, resulting in low prices.
Depending on the type of equipment used, vacuum casting can to create very large parts.
The vacuum process removes air bubbles and allows the material to capture fine details.
Coloring pigments can be added to the resin for a variety of color options.
Silicone molds can be used around 20 times before they need replacing.
| Typical lead time | Up to 20 parts in 15 days or less, depends on the part specification and volumes. |
| Accurate | ± 0.3% (with lower limit on ± 0.3 mm on dimensions smaller than 100 mm) |
| Minimum wall thickness | To ensure that the mold is filled properly, a wall thickness of at least 0.75 mm is necessary. For best results, we recommend a wall thickness of at least 1.5 mm |
| Maximum part dimensions | The size of the mold is limited by the dimensions of the vacuum chamber (1900 x 900 x 750 mm) and by the volume of the product (maximum volume: 10 liters) |
| Typical quantities | Up to 25 copies per mold (depending on the mold’s complexity and the casting materials) |
| Color & Finishing | Pigment is added to the liquid polyurethane prior to casting, custom painting and texture. |
